- Non-contact
- Accuracy + 1%
- Light Weight
- Small
- Easy to Use
- Reliable
- Maintenance Free
- Cost effective
The DynaTension P1000 portable tension meter is a small, lightweight, easy to use instrument that requires neither in-line installation nor calibration.
The P1000 tension meter is smaller than a breadbox and only weighs 5 lbs (2.3 kg). It derives tension from the frequency of vibration of a span of material. All it requires is keypad entry of cable span length, cable weight per foot or unit mass and tapping or plucking the cable. The P1000 may be used to measure and display either tension or vibration frequency.
A variable inductance sensor model VARI-L 101 held near the cable senses the vibration frequency and the P1000 does all the rest. Alternatively, a small (0.013 lb.) contact sensor, model ACSENS 103A may be stuck onto the cable to sense the vibration frequency.
|
|
Cost Efficient - Simple
to use
Cost Efficient.
DynaTension eliminates
need for in-line
installation.
Allows normal operations
to continue
uninterrupted. Operates
on a single
rechargeable battery up
to 15 hours .
DynaTension's accuracy
and durability
are proven worldwide,
onshore
and offshore. It is used to measure tension in numerous applications such as: anchor lines, marine tow lines, elevator cables, construction cables, umbilical cables, bridge cables, synthetic rope tow cables, pre-stressed concrete wire or strand, small filament, belts and webbing.
Today the U.S.Navy's
entire fleet of
aircraft carriers relies
on DynaTension
to set critical tensions
in aircraft
elevator cables.
For application
assistance contact
your local DynaTension
representative
or our manufacturing
facility.
|
|
Viten:
6503 Northway Drive
Spring, Texas 77389
Phone:
281-251-9788 |
Fax:
832-364-6980 |
Email:
viten@viten-dynatension.com
|
