Non-contact sensing
No in-line installation
Zero wear
Zero drift
Highly accurate
DynaTension never needs re-calibrating
DynaTension  products are used to measure tension in all materials from the tiniest optical fiber to the largest cable
man has made.  All with a single instrument!

By application of the vibrating string equation,
DynaTension  makes possible the measurement of tension in
materials without physical contact.  This technology makes in-situ measurement of tension without disturbing the
item under test and without in-line installation.

DynaTension measures tension in many diverse applications, including crane loads, mooring lines, tower guys,
pre-stressed concrete strand, belt and webbing, umbilical cable, steel rods, elevators, and yacht stays to name a
few.  This can be accomplished while either stationary or running.  If it can vibrate,
DynaTension can measure it.

The U.S. Navy's fleet of aircraft carriers depends on the accuracy and dependability of our model P1000 portable
tensiometer to maintain critical aircraft elevator cable tensions.  

Offshore drilling companies depend on our model ALM 400 to continuously monitor tension in their anchor cables
and provide alarms if dangerous tension levels are measured.

All
DynaTension  products allow data collecting and recording via computer interface.  More products and
applications are continually being developed.  All manufactured in the USA.
Portable tension meter - P1000
Mooring tension monitor - ALM 400
Crane load monitor - M2000
Riser load monitor - RLM 2000
Weight on bit monitor - DWM 2000
Ton cycle indicator - TCI 2000
Viten   *   6503 Northway Drive   *   Spring, Texas  77389
WELCOME TO VITEN
TECHNOLOGY UTILIZING THE VIBRATING STRING EQUATION FOR SUPERIOR RESULTS
MANUFACTURER OF
Ph:  281-251-9788   *   Fx:   832-364-6980